The LG dishwasher is a home device that cleans dishes, silverware, and other items used in the kitchen. It is a fully automatic machine that works by spraying water and soap on the dishes, clearing dirt and grime, and then draining the dirty water. LG is a well-known name that makes many different kinds of dishwashers with different features and sizes to meet different needs.
LG dishwashers use high-tech features like QuadWash, TrueSteam, and an Inverter Direct Drive motor to make sure that they clean well and quickly. QuadWash technology has four wash arms instead of the usual two. This makes it easier to cover more area and clean better. TrueSteam technology uses steam to get rid of tough stains and kill germs, and the Inverter Direct Drive motor makes sure the machine runs more quietly and uses less energy.
LG dishwashers have many features, such as different wash processes, racks that can be moved, smart connectivity, and ways to save energy. Some models have a third rack for cutlery, a sensor that can tell how dirty the dishes are, and the choice to start the dishwasher later. LG also has types that are built-in, semi-integrated, and freestanding, each with its own size and style.
What is LG Dishwasher OE Error Code?
The LG dishwasher OE error number usually means that there is a problem with the drain. This error code means that the dishwasher didn’t drain properly in the time it was supposed to. There are a few things that could cause this error code, such as a blocked drain hose, a broken drain pump, or a blockage in the filter or drain of the dishwasher. You can try the following to solve this problem:
- Check to see if the drain hose is clogged or has kinks, and make sure it was put in correctly.
- Check the filter in the dishwasher and clean it if it needs it.
- Check to see if the water pump is clogged or broken, and if it is, replace it.
- If the steps above don’t fix the problem, you may need to call a professional to look at and fix your LG dishwasher.
How to Fix LG Dishwasher OE Error Code?
Check for Food Debris
If you see food particles in the tub of your dishwasher, you should get rid of them. This includes bigger pieces of food and things that might not get cleaned out during a normal run. Also, doing normal maintenance tasks can help keep food debris from building up. This includes cleaning the spray arms and filters and running a maintenance routine. After doing maintenance, you should run a HEAVY DUTY or NORMAL cycle with no dishes or soap to clean out the machine and test the drain.
Clean the Filter
It is important to clean the filter often so that the dishwasher works well. Start by taking out the lower rack to clean the filter. The filter is under the rack, below the long spray arms. Follow the manufacturer’s step-by-step steps or watch a video to make sure you clean it right.
Check the Drain Hose
If the dishwasher isn’t running properly, the drain hose may be kinked. Check the drain hose and fix it so that it doesn’t get kinked. Look under the sink for a line that is ridged or corrugated and may be white, clear, or gray. Check to see if something has been pushed against or on top of the hose, which could have caused it to get pinched or kinked. Straighten out the hose and test it.
Check the Air Gap
If the dishwasher isn’t draining right, the OE error number may show up. Check for trash and clogs in the drain air gap or in-sink disposal.
New Dishwasher or Garbage Disposal
If a new dishwasher or trash disposal has been put in, it could affect how well the dishwasher drains. It’s best to look at the installation guide or call the maker for help.
Force the Drain
Check the control panel for the CANCEL & DRAIN button to do a drain-only run. This is turned on by holding down two buttons at the same time, like DELICATE + DUAL CONTROL. The two buttons may be different from one type to the next. If the model doesn’t have a CANCEL & DRAIN button, start a cycle, let it run for 45 seconds, and then turn the unit off. Every cycle starts with 45 seconds of draining.
Request a Repair
If none of these work and the OE error code keeps showing up, the unit may need to be fixed. You can get help by calling the maker or going to their “Request a Repair” page.
Causes of LG Dishwasher OE Error Code
The OE error code on an LG dishwasher can be caused by a number of issues with the washing system. Here are a few of the most usual reasons for an OE error code:
- Filter Gets Clogged: A dirty or clogged filter can block the flow of water, which can cause drainage problems. If the filter is jammed, the dishwasher may not drain properly, which sets off the OE error code.
- The drain tube takes water out of the dishwasher. If it gets kinked or clogged, the water can’t get out. If it’s bent or stopped, it can make it hard for water to flow through, which can cause drainage problems. This can cause water to stay in the dishwasher, which will cause the OE error code to appear.
- Drain Pump Not Working: The drain pump is what moves the water out of the dishwasher. If it isn’t working right, the dishwasher may not drain the water, which can cause the OE error code to show up.
- Problems with the air gap or the garbage disposal: The air gap is a device that stops the trash disposal from flowing back into the dishwasher. If it’s plugged in, water might not drain properly, which could cause the OE error code to show up. In the same way, if there is a problem with the trash disposal, water can back up into the dishwasher, which can cause drainage problems.
- Other Factors: The OE error code can also be caused by a broken water inlet valve, a broken control board, or a problem with the float switch in the dishwasher.
LG dishwashers use high-tech features like QuadWash, TrueSteam, and an Inverter Direct Drive motor to clean well and quickly. The OE error code usually means there is a problem with the drain. To fix it, check for food debris and call a professional. Do regular maintenance tasks to keep food debris from building up. Run a HEAVY DUTY or NORMAL cycle with no dishes or soap to clean out the machine and test the drain.
Clean the filter, check the drain hose, air gap, new dishwasher or garbage disposal, force the drain, and request a repair if necessary. The OE error code on an LG dishwasher can be caused by a number of issues with the washing system, such as clogged filters, kinked drain tubes, not working drain pumps, air gaps, broken control boards, and float switches.
Check our website for more updates.